Iraq is densely populated with oil extraction, chemical smelting and industrial parks. A large amount of oily wastewater is generated during industrial production, including oilfield produced water, workshop cutting wastewater and equipment cooling wastewater. It has the characteristics of high oil content, deep emulsification, high impurity content and strong corrosion. Direct discharge not only pollutes soil and groundwater, but also violates Iraqi environmental protection regulations. Baihuipu 30m³/h Industrial Oily Wastewater Treatment Equipment, made of carbon steel, is customized for high-temperature, high-salinity and high-oil working conditions in the Middle East. It strictly complies with Iraq COC and IQS standards, and is suitable for industrial scenarios such as oilfields, refineries and heavy industrial parks. It can efficiently treat various industrial oily wastewater to achieve up-to-standard discharge and resource reuse, making it the core preferred equipment for environmental protection governance of industrial enterprises in Iraq.

Factory Strength

As a national "Specialized, Refined, Differential, Innovative" environmental equipment manufacturer, Baihuipu has been deeply engaged in the field of industrial oily wastewater treatment for many years. Its two production bases cover a total area of 80,000 square meters, with a dedicated automatic production line for industrial oily wastewater treatment equipment, CNC cutting/anti-corrosion welding workshop, and a simulation test center for high-temperature and high-salinity working conditions in the Middle East. The annual production capacity reaches 15,000 units/sets, which can meet the large-scale procurement and customization needs of overseas industrial enterprises.

Core plate: Adopting ≥2.0mm thick carbon steel base material, with heavy-duty epoxy anti-corrosion coating on the surface, resistant to high temperature, high salt spray and high corrosion environment in the Middle East, suitable for industrial heavy-duty operation scenarios, effectively extending the service life of the equipment to more than 15 years;

Core process: Integrating physical gravity separation, inclined plate coalescence and chemical demulsification triple treatment technologies, it can efficiently remove free oil, dispersed oil and emulsified oil, solve the industry pain point of difficult separation of emulsified industrial oily wastewater, and the separation efficiency is far higher than that of conventional equipment in the industry;

Key components: Equipped with imported high-efficiency coalescing plates, explosion-proof PLC control system, IP66 protection level electrical components and 304 stainless steel pumps and valves, ensuring stable operation of the equipment under harsh industrial working conditions and reducing operation and maintenance costs;

Full factory inspection: Each equipment undergoes 24-hour full-load operation, 120% impact test and high-temperature aging test, with CMA/CNAS authoritative test report, ensuring that the equipment performance meets the standard and there are no factory defects;

Export delivery: Equipped with a professional Middle East foreign trade service team, familiar with Iraqi import regulations and customs clearance procedures, providing professional moisture-proof, shock-proof and sun-proof marine packaging, FCL direct to Basra and Umm Qasr ports. It can provide a complete set of customs clearance documents such as Iraq COC Certificate of Conformity and Certificate of Origin, realizing fast customs clearance and smooth acceptance.

Export Certifications

The equipment has obtained Iraq mandatory COC Certificate of Conformity, EU CE (EN 1825) industrial certification, ISO9001 Quality Management System Certification, ISO14001 Environmental Management System Certification, CCEP Environmental Protection Product Certification, SGS carbon steel material test report, and CMA industrial oily wastewater effluent test report. It fully complies with Iraqi IQS industrial environmental protection standards and customs clearance requirements, and also meets the relevant requirements of the "HJ/T 181-2005 Technical Specifications for Treatment and Reuse of Iron and Steel Industry Wastewater". It can be put into industrial production without additional rectification, completely solving the problem of export compliance for overseas enterprises.

30m³/h Technical Parameters (Precisely Adapted to Iraqi Industrial Oily Wastewater)

Rated treatment capacity: 30m³/h (30% peak treatment redundancy reserved, maximum treatment capacity up to 39m³/h), suitable for the daily and peak working conditions of small and medium-sized industrial enterprises, avoiding the efficiency reduction of equipment under full-load operation;

Inlet water quality: Oil ≤5,000mg/L, SS ≤3,000mg/L, temperature ≤60℃, pH 5.5-9.5, capable of treating various industrial oily wastewater such as oilfield produced water, chemical oily wastewater and mechanical cutting wastewater;

Effluent standard: Oil ≤5mg/L, SS ≤20mg/L, COD ≤50mg/L, meeting Iraqi industrial wastewater discharge limits. The treated wastewater can be used for workshop flushing and greening irrigation, realizing water resource recycling;

Separation efficiency: ≥98%, of which the separation efficiency of highly emulsified oil is ≥95%, which can efficiently remove free oil, emulsified oil and fine oil droplets in water, solving the pain point of incomplete separation of industrial oily wastewater;

Material specification: The shell is carbon steel (with heavy-duty epoxy anti-corrosion coating), the internal parts are 304 stainless steel, and the sealing parts are oil-resistant nitrile rubber (Shore hardness 70±5), suitable for industrial high-corrosion working conditions;

Control method: Automatic PLC + touch screen operation, supporting remote monitoring, automatic slag discharge, automatic oil scraping and automatic oil discharge, equipped with 40℃ constant temperature heating function, adapting to the low-temperature start-up demand in the Middle East, no special person on duty is required, reducing manual operation and maintenance costs;

Energy consumption and noise: Energy consumption ≤0.75kW·h/m³, operating noise ≤58dB, meeting the noise control standard of industrial plants, energy-saving and environment-friendly;

Installation specification: Dimensions L6200×W2200×H2400mm, modular skid-mounted design, no complex civil engineering required, installation and commissioning can be completed in 3 days, and it can be quickly put into industrial production.

Reference Projects (Real Overseas Industrial Cases, Suitable for Production Enterprises)

Abu Dhabi Refinery (UAE): Adopting Baihuipu 25m³/h carbon steel industrial oily wastewater treatment equipment to treat high-oil wastewater generated in the oil refining process, stably achieving effluent oil ≤5mg/L, continuous operation for 4 years without failure, and recognized by the local environmental protection department;

Dammam Food Industrial Park (Saudi): Equipped with Baihuipu 40m³/h industrial oily wastewater treatment system to treat oily wastewater generated in food processing, adapting to high-temperature and high-oil working conditions, the effluent meets the standard and can be reused, winning the award of Saudi environmental protection department;

KBM Oilfield (Kazakhstan): Adopting Baihuipu carbon steel industrial oily wastewater treatment equipment to treat oilfield produced water. After pretreatment + advanced treatment, the wastewater is reused for oilfield steam injection boiler water, solving the problems of local water shortage and oilfield wastewater pollution. It operates stably and reliably, and is optimized to adapt to Middle East working conditions with reference to the experience of similar oilfield treatment projects.