Baihuipu Delivers Membrane System to Guoxuan Lujiang Plant

Baihuipu has delivered order No.19 — an integrated wastewater membrane treatment system together with sectional steel water tanks — to the Lujiang battery materials plant of Guoxuan in Anhui Province. The shipment left our Guangdong works this week, travelled by flatbed truck, and was unloaded at the client's site with forklifts handling the membrane unit and tank sections. Photos from the unloading show the unit arriving intact with transport caps still fitted. The system will treat combined effluent from the plant's production lines, and installation begins once the concrete bases and site utilities are ready.

Key Features and Benefits

Factory Preparation and Load-Out

Before dispatch, the membrane system was assembled, pressure-checked and piped as a complete skid in our Guangdong works. Nozzle openings were capped, instrumentation was removed and packed separately, and the unit was walked out to the loading bay on rollers so the painted surfaces never touched the floor. Loading at the factory is where most transport damage is either prevented or created, so the sequence is planned rather than improvised.

The same preparation discipline sits behind our integrated MBR sewage treatment unit, where membranes, aeration and controls ship as one factory-tested package. Shipping a system as a single tested skid also shortens site work: connections arrive where the drawings say they will be.

Transport and Arrival at the Lujiang Site

The membrane unit travelled to Lujiang on a flatbed truck with the load strapped against shifting, and the steel tank sections and accessory materials followed on the same delivery. On arrival, the client's gate and internal roads were checked against the vehicle dimensions before entry, and a forklift lifted the unit from the trailer directly to its staging position beside the treatment area.

Unloading went without incident, which is the ordinary outcome when lift weights, fork positions and ground conditions are agreed before the truck rolls. The delivery close-out mirrors the single-contractor responsibility we describe in DTRO membrane system, where one organisation owns the schedule from fabrication through site handover.

Sectional Steel Water Tanks and Site Handling

The steel water tanks for this order ship as sectional panels and base frames rather than as welded vessels. Sectional construction keeps each piece within forklift capacity, stacks efficiently on the truck, and assembles quickly on the prepared concrete base — which is why the format suits plants where crane access is limited.

The grey sections visible in the photos are the tank base modules being moved into the warehouse ahead of assembly. During site works, two forklifts shared the handling between the storage building and the installation area, sequenced so that panels, membranes and chemicals arrive at the workface in the order the installers need them.

Technical Specifications

The table below summarises what this delivery contained and what follows on site. Detailed process parameters for the system were fixed in the design basis agreed with the client before fabrication.

Scope items reflect this order's delivery record; process design values are governed by the project design basis.

Customer FAQs

What does an integrated wastewater membrane treatment system include?

A typical skid combines pretreatment, the membrane modules, cleaning-in-place equipment, dosing and a control panel on one frame. The exact layout is sized from a full feed analysis and the site's discharge or reuse targets, then factory-tested before dispatch.

Why use sectional steel water tanks instead of concrete basins?

Sectional tanks ship compact, bolt together on a prepared base in days rather than weeks, and can be relocated or extended if the plant grows. They avoid wet civil work on sites where concrete construction is difficult to schedule.

How is membrane equipment protected during transport?

Nozzle openings are capped, instruments and loose items are packed separately, the skid is fixed against shifting, and every crate carries a packing list. On arrival, weights and fork positions are agreed before unloading starts.

What happens after unloading at the site?

Equipment is staged beside the treatment area, the steel tanks are assembled on their base, and then pipework, electrical connection and commissioning follow. Commissioning is scheduled once the client confirms that civil works and utilities are complete.

Projects at a similar stage are described in the EPC wastewater plant delivery and the delivered metal recovery project, and the paperwork that accompanies each shipment is covered under our equipment documentation standards.

Why Choose Baihuipu as Your Manufacturer

Two decades in this industry teaches you that most treatment problems are procurement problems in disguise. Someone bought the cheapest skid, nobody checked the equalisation volume, and eighteen months on the plant cannot hold its consent limit. We build differently.

Own Factory, Real Capacity

Tanks, skids, control panels and membrane housings are built in our own Guangdong facility. Nothing critical is subcontracted, which is why we can commit to delivery dates and hold quality across a batch instead of hoping the shop floor gets it right.

Certification and Export Practice

CE marking is standard and we work to ISO 9001 procedures. Where a project calls for specific material grades, pressure vessel certification or ATEX-rated equipment, we build to that standard and ship the full documentation pack.

Experience Built the Hard Way

Since the early 2000s we have commissioned plants for food and beverage processors, chemical works, electroplaters, textile mills, mines and municipalities. The lessons that stick are scaling, fouling and sludge handling — those inform every design we issue.

We Engineer the Whole Train

Screening, equalisation, biological or chemical treatment, membranes, evaporation, brine handling — the complete line comes from one organisation. Process design, mechanical, electrical and PLC programming sit under the same roof, so there is no gap for finger-pointing at handover.

Twenty-Plus Export Markets

We have shipped to the United States, Canada, Russia, Indonesia, India, Nigeria and Vietnam among others. Crating, export documentation and certificates are handled in-house, which keeps customs surprises to a minimum.

Spares, Service and Commissioning

Membranes, dosing pumps, diffusers, instrumentation and blowers are stocked for the systems we sell. Our control systems support remote diagnostics, and we can put an engineer on site for commissioning, training or an unplanned shutdown.

Talk to Our Engineers

Send through your raw water data and we will advise on the viable process route and realistic operating cost before you commit to anything. We can be reached on WhatsApp: +86 13631765076 or through hkbhp.com.

WhatsApp: +86 13631765076